HIGH POWER® HPA-601250U3 REV: C0-A42 2.5/5.5mm
60W Energy-efficient Fanless AC to 12V Power Adapter
60W Energy-efficient Fanless AC to 12V Power Adapter
- Input: 100-240 VAC +/- 10% full range
- Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong computer power cord.
- Output Voltage: 12V DC
- Ratings: 5A (60W)
- Standby idle no load power consumption is less than 0.5 Watt
- High efficiency switching technology with 83% efficency
- DC Cable length - 47.5" (120cm)
- DC Jack Type: barrel 2.5/5.5mm
- High efficiency switching technology with 83% efficency at full load
- Fanless AC adapter operates in total silence. Ideal power source for devices such as DVR, LCD monitor, etc.
- Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
Applications:
Security device such as LCD monitor, mini ITX system, etc.
CEC Efficiency Level: IV
Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE
RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.
Specifications:
- Universal input 100-240 VAC
- High efficiency switching technology -- 83% typical @ full load
- Single 12V output @ 5A +- 5%
- Load Regulation: +- 5% (11.4V - 12.6V)
- DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
- Over Current protection
- Over Voltage protection
- Short circuit protection
- Open-Circuit Protection
- 100% HI-POT tested
- 100% cycling BURN-IN
- Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
- Storage Environment:
- Temperature: -20 - 85 degree C Humidity: 5 - 90 % Altitude: From sea level to 40,000Ft
- Operating Environment:Temperature: 0 - 40 degree C Humidity: 10 - 90 % Altitude: From sea level to 10,000Ft
- MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
- Input Fuse Rating: T3.15A/250V
- Inrush Current at cold start, maximum load:
- 30A at 110 VAC
- 60A at 220 VAC
- Line Regulation: This line regulation is less than ± 1%, @ full load .
- Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
- No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
- DC Output Ripple/Noise: 2% max
- Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
- Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
- Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
Built-in power status indicator
- Green LED turns steady on when there is a reliable 12V DC output.
- LED flashes when there is a problem found by the internal detection circuitry.
- LED turns off when there is no power output or no power input.